The Process
Step 1 - Prep and Clean
We first clean and degrease all areas of the concrete as thoroughly as possible, to accept acid and water based stains.
Almost all colors and finishes can be achieved by Etched in Stone depending on the age, concrete mix and condition of existing concrete.
Step 2 - Stain
Acid stain which sinks into surface is applied first, then water based stains are applied in a faux finish style to give depth and character. Some effects that can be simulated are flagstone, slate, brick, paver stone, or random. THE SKY'S THE LIMIT!
Step 3 - Custom Design
Patterns/borders/designs are chalked out and cut directly into the concrete surface. Unique logos and custom design concepts can be added to your site to make it truly your own.
Let us make a look that fits your style. We are familiar with the capabilities that can enhance your decorative concrete and create that CURB APPEAL you're seeking.
Dare to be different
Step 4 - Sealer
After the surface has been cleaned, stained and cut, we again wash the surface and apply two coats of a durable weather resistant UV SEALER that extends your concrete surface life. You will be supplied with an aftercare information sheet that will help in maintaining your new decorative concrete enhancement.
* Etched-in-stone will attempt to remove existing stains in concrete to the best of our abilities but, not all stains can be removed or a shadow stain still remains. The stains that cannot be removed, or leave a shadow in the concrete may effect the final stain or appearance of the enhancement. Etched-in-stone will not be held responsible.
http://www.etched-in-stone.net
